真空吸料机

水式模具控温机

采用全数位PD分段式控温系统在任何操作状态下均可维持稳定的模具温度控制精度达到±1℃;采用高效率水循环泵浦压力大稳定性高;配备缺水、缺相、高温等多项安全装置当故障发...
  • 详细介绍
特点:

采用全数位PD分段式控温系统,在任何操作状态下均可维持稳定的模具温度,控制精度达到±1℃。
 
采用高效率水循环泵浦,压力大,稳定性高。
 
配备缺水、缺相、高温等多项安全装置,当故障发生时,本机可自动侦测到异常,并有指示灯显示异常状况。
 
外观设计美观大方,便于拆卸,维修方便。
 
电控箱与机身采用隔离式,隔热效果佳,可延长电器零件的使用年限。
 
采用高效板式热交换器,降温迅速,温控稳定。
 
All digital P.L. D sectional temperature control system is used to maintain stable mold temperature in any operating condition, and the control precision is up to 1.
 
High efficiency water circulation pump, high pressure, high stability Equipped with water shortage, lack of phase, high temperature and other safety devices, when the fault occurs, the machine can automatically detect abnormal, and there is an indication of abnormal condition.
 
Appearance design is beautiful and generous, easy to disassemble easy to maintain.
 
The electric control box and the machine body adopt isolation type, heat insulation effect is good, can prolong the service lite of the electnc appliance part. 
 
High efficient plate heat exchanger, cooling quickly temperature control stab lity.

规格表:

水式模具控温机

水式模具控温机
地址:广东省东莞市黄江镇盛世恒峰工业区 电话:0769-82118923 Copyright © 2010-2018 东莞市兴为精密机械设备有限公司 版权所有
技术支持:【QQ:726820345】  ICP备案编号:粤ICP备18140332号  网站地图